In modern vehicles, the hydraulic steering system has become one of the standard configurations. It not only greatly reduces the operational burden on drivers, but also enhances the safety and comfort of driving. This article will deeply explore the working principle, types and key points of maintenance of the bm6 series hydraulic motor supplier, helping you better understand and use this important automotive component.

What is a bm6 series hydraulic motor supplier?

The bm6 series hydraulic motor supplier is a device that uses liquid pressure to assist the driver in turning the steering wheel. It generates pressure by pumping hydraulic oil and transmits it to the steering gear, thereby achieving control over the direction of the wheels. Compared with the traditional mechanical steering system, hydraulic steering can provide a smoother and more effortless steering experience.

The basic components of the hydraulic steering system

1. Power steering pump: This is the core of the entire system, responsible for converting the engine's power into the pressure of high-pressure liquid.

2. Power steering cylinder: After receiving high-pressure oil output by the pump, it adjusts the Angle of the vehicle's front wheels according to the direction and magnitude of the force applied by the driver to the steering wheel.

3. Storage tank and filter: They are used to store hydraulic oil and ensure its cleanliness, preventing impurities from entering the system and causing damage.

4. Pipelines and hoses: Connect the above-mentioned components to ensure the smooth flow of liquid.

A brief description of the working principle

When the driver rotates the steering wheel, a series of linkage mechanisms will be triggered. First of all, as the steering wheel Angle changes, the valve opens or closes the corresponding channel, allowing high-pressure oil to flow into the specific side of the assist cylinder. Then, under the action of liquid pressure, the piston on this side is pushed to move, which in turn drives the connecting rod to change the position of the front wheels. In this way, the conversion process from human input to vehicle response is completed.

Introduction to Common Types

1. Circulating ball hydraulic power steering: Simple and reliable structure, suitable for applications such as heavy-duty trucks that require large torque output.

2. Rack-pinion type hydraulic power steering: It responds sensitively and quickly, and is commonly found in cars and other light vehicles.

3. Electronically controlled hydraulic power steering: Combining the advantages of traditional hydraulic technology and electronic control units, it can automatically adjust the degree of power assistance according to the actual driving conditions, achieving a better control effect.

Daily maintenance suggestions

To ensure the normal operation of the hydraulic steering system, regular inspection is very necessary. Mainly including:

Regularly replace the oil with clean new oil and clean the related components.

2. Pay close attention to whether there is any leakage. Once found, it should be dealt with immediately.

3. Maintain a sufficient oil level to prevent air from entering and causing bubble formation, which could affect performance.

4. If you feel that the steering is getting heavier or abnormal sounds occur, it may be that the internal parts are severely worn. You should send it for repair in time.

In conclusion, it is very useful for every car owner to understand and master the knowledge about bm6 series hydraulic motor supplier. Through correct usage methods and timely and effective maintenance measures, the service life of the equipment can be effectively prolonged and driving safety can be guaranteed. I hope the above information can be of help to you! If you have any other questions regarding car maintenance and repair, please feel free to consult us at any time.

bm6 series hydraulic motor supplier https://www.aj-motor.com/BM6-series-hydraulic-motor.html